For the ultimate in durability and strength, G2 offers new High Pinion 60 axle assemblies featuring Currie RockJock housings. These bullet-proof axle assemblies are designed with the hardcore wheeler/rock crawler in mind. Built to order packages include the complete housing featuring the new RockJock III ductile iron center (highest ground clearance 60 on the market), AR400 heat-treated skid plate allowing the axle to slide over rocks easily, 3” d.o.m. steel tubes, 1350 pinion yoke, (1310/1330 optional), and all new heavy duty Currie Jeep suspension brackets. These housings are hand assembled by expert drivetrain specialists using high quality G2 axle shafts, G2 Premium ring and pinion gears, Timken bearings and the locker of your choice.
|RATIO||ARB AIR LOCKER||DETROIT LOCKER||EATON E-LOCKER||TRUE TRAC|
|4.10||TJR JR 410 ARB||TJR JR 410 DL||TJR JR 410 E||TJR JR 410 TT|
|4.56||TJR JR 456 ARB||TJR JR 456 DL||TJR JR 456 E||TJR JR 456 TT|
|4.88||TJR JR 488 ARB||TJR JR 488 DL||TJR JR 488 E||TJR JR 488 TT|
|5.13||TJR JR 513 ARB||TJR JR 513 DL||TJR JR 513 E||TJR JR 513 TT|
|5.38||TJR JR 538 ARB||TJR JR 538 DL||TJR JR 538 E||TJR JR 538 TT|
DO NOT USE SYNTHETIC OIL FOR GEAR BREAK IN. IT IS OK AFTER THE FIRST 500 MILES OF BREAK IN.
*Please specify if vehicle is equipped with rear disc brakes upon ordering
Emergency brake cables sold separately per vehicle application
For assemblies w/disc brake option: Modification to rear sway bar mounts will be necessary to re-use factory sway bar
For optional disc brake kit, add "D" at the end of assembly part number
Emergency brake cables sold separately per vehicle application, see "Brakes" section